Do-it-yourself wooden garden storage boxes are a simple method of storing seasonal and temporary items. Wooden storage boxes may be used in the garage, on the patio or in a storage shed to hide seasonal equipment, such as patio sets, pool equipment, bikes and machinery. While you can easily invest in a storage box at a hardware store, building a wooden one at home is actually a cheaper alternative as well as the box can be personalised and custom-built to fit into any space.
Measure the space where Items Stored In Garden Storage Box For is going to be placed, and jot down the figures for that height, width and depth you will need the package to get. Draw the pieces needed for the 4 sides from the box on the plywood sheets, using a pencil. You will want two side pieces measuring height by depth, and also the front and back pieces should measure height by width. Cut out the four pieces using the saw. Use the sandpaper to make the edges and surfaces smooth and splinter-free.
Arrange among the side pieces so it will be perpendicular towards the front piece. Both pieces needs to be on end, as well as the end from the side piece ought to be covered by the top side in the front piece. In other words, one side pieces is going to be attached in the back and front piece ends.
Attach the two pieces utilizing the drill and at least four screws through the front piece. Attach the second side piece in a similar manner towards the opposite end of the front piece. Guarantee the second side piece’s end is inside the front piece. Last, attach the back piece with all the drill and screws, so both ends in the side pieces are protected by this last piece. You should have a rectangular wooden frame.
Measure the rectangular frame’s perimeter. This will give you the measurements for the bottom and lid pieces. Write the measurements down. Transfer the measurements towards the plywood, utilizing a pencil. Be certain they’re square, then cut them by helping cover their the saw and sandpaper both pieces.
Attach the base piece by lining it up for the wooden frame. Put the level on the box to be sure the piece is level as well as. Attach it with screws placed every 6 inches, drilling the screws from the bottom piece and into comfou four sides. When done, turn it over, so you own an open box with no lid.
Attach two hinges towards the lid piece, screwing them to the underside of one of many long sides. Flip the wooden garden storage box on its side to put in the lid properly. Line the lid up to the box so that the hinges are within the box and attach the hinges using screws and the screwdriver. Flip the wooden storage box right side up and close the lid.