Septic Tank Pumping Service Hollywood

Do you know where your septic tank is? Okay, so you can point to an area on the property and say “yeah, it’s there” with a hint of un-sureness. The next real question is probably more important then the one just asked. Do you know where the lid to your septic tank is? Does that have you scratching your head?

Septic tanks by their very nature are buried, sometimes 3 feet or deeper underground. Away from sight away from mind as it were. But that’s possibly not a very important thing. There will come a period when your septic system actually starts to exhibit problems and requires some maintenance/repairs and also the tank has to be pumped out. Possessing a general idea as to the location of your tank can make getting this easy task done a lot more difficult.

There are 2 ways to cope with this problem and something way to ensure that down the road it won’t be a problem. First let’s look at choosing the lid for the septic tank in the event you don’t know where it is actually. You can either dig for it yourself or possess the septic pumping service do it. Doing it your self can be time-consuming and very little fun. Having the pumping service do it can be costly.

Generally it is actually done in this fashion. You or someone you hire must dig down until they discover the top of the septic tank. That is often the easy portion of the process. Once you find the top in the tank you then must discover the lid. This can involve digging concentric circles outward from the initial hole before you find the lid. Once you see the lid now is the time to repair the problem; install a riser.

A septic tank riser is basically a big tube that extends from your lid from the tank approximately the surface of the ground. Once installed it can provide quick accessibility septic tank that’s easy to find any time there exists a problem or it needs to be pumped out.

There are three basic types of risers to pick from; concrete, PVC, and polyethylene.

While concrete risers are typically cheaper it isn’t your best option. A concrete riser is heavy and may need heavy equipment to lift and do the installation. It is also more likely to leak then your other materials and may have rust problems if rebar can be used to strengthen the cement.

PVC and polyethylene risers are lightweight and simple to install. They are resistant against corrosion not to mention will never rust. Additionally they incorporate a gasket seal to help keep water from entering and prevent sewer gases from escaping from the leaky lid. The increased cost of these 2 kinds of risers is well worth the cost. They are virtually maintenance free and will easily last for that life of the entire septic system.

Every septic tank needs a riser and in many places they are now a code requirement. If you don’t have one it might be worth having one installed before something goes completely wrong along with your septic system. Quick access to the tank is just one of bawvgx first steps to diagnosing any problems.

A properly designed septic system could keep maintenance issues and problems as low as possible. In case you are thinking about installing or replacing a septic system a neighborhood septic tank pumping service can point you in the right direction. To learn more about septic tank pumping and design please just click here.

Septic Tank Pumping Service Hollywood..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.